Nitro Fuel Bottle,

This is Super Easy to Create a Fuel Filler for Nitro RC Cars!

I decided to create one, since I got my RC Without Fuel Bottle, and I was struggling to get the Big 5.0 L Tank to fill my car! And was too lazy to buy one.

This is Super Useful For someone who doesn't have a fuel Bottle! And I really recommend making one!

Super easy to move Fuel to tank! Or Back to tank! Takes only a Squeeze!

You Require

- Something Sharp to make a hole for straw,

- A Plastic Straw, that has the bendable end!

- Hot Glue Gun.

- Bottle, Something that is squishable I'd recommend 1 Liter.

If you want Long Lasting Bottle,

I'd recommend Silicone Glue or something to seal the straw from Leakage by cap.

Optional

- 3D Printer

Drill or melt, Just make sure the straw fits, Not too tight, nor too loose.

I personally used my screwdriver. to make a hole, Easy!

Cut the Straw to length you require.

Fit your straw into the hole!

• Optional! Use silicone to seal around the straw instead of using hot glue gun!

If No Silicone sealant

Use glue gun. Try to glue the whole cap, to minimize leakage!

Optional, Printing

3D Printing Fuel Nozzle stopper for straw,

Make sure to measure your straw Size, 3D model i created Requires bit Size tweak to fit your straw.

File OBJ link for print

https://www.thingiverse.com/thing:6530993

Should take under 5 min to print depending of Straw size

Id personally test the Fuel bottle with water, See if it leaks or Has a problem.

If you did everything correct you should work perfectly! Enjoy your new Fuel Bottle