No-Sew Memory T-shirt Pillow

by bicktasw in Craft > No-Sew

942 Views, 9 Favorites, 0 Comments

No-Sew Memory T-shirt Pillow

DSCN6652 (2).JPG

This is a quick and easy project that anyone can do. Since it's no-sew there is not a lot of supplies or equipment needed for the project so it is quite inexpensive to make. This particular Memory Pillow is for my niece who recently lost her husband. This was one of his favorite t-shirts that I transformed into a family momento that they will cherish for years to come.

Supplies

DSCN6621.JPG

T-shirt; foam pillow-form; scissors; ruler; Magic Marker (not shown)

DSCN6629.JPG

Lay out the t-shirt on a flat working surface, working out any wrinkles. Iron the t-shirt, if needed.

DSCN6631.JPG

Place the foam pillow form in the center of the t-shirt, making sure it covers all or most of the design.

DSCN6637.JPG

With the marker, put a dot at each corner of the pillow form and along the sides to mark the size and shape of the pillow.

DSCN6638.JPG
DSCN6639.JPG

Measure 2 to 3 inches from edge of pillow form to mark area where you'll cut out the t-shirt.

DSCN6640.JPG
DSCN6642.JPG
DSCN6641.JPG

Mark area to be cut with dots ... 2 to 3 inches from original dots. This will indicate where to cut. There's no need to be precise as this is a very forgiving project and any mistakes can be easily disguised.

DSCN6643.JPG
DSCN6644.JPG

Next, with scissors, clip out all four corners as shown in picture. This step makes tying the strips along the corners much easier. Next, clip 1/4 to 1/2 inch strips along the 2 to 3 inch border, all the way around. Make sure to clip both layers together so the strips match on each side. (You will be tying these strips together to finish the pillow so they should be fairly uniform. )

DSCN6646.JPG
DSCN6647.JPG

Separate the 2 layers and place the pillow form in the middle of the bottom layer.

DSCN6648.JPG

Place the top layer, face side up, on top of the pillow form. Try to arrange all the strips so they match. Again, this does not have to be perfect, but try your best to match them up.

DSCN6649.JPG
DSCN6650.JPG
DSCN6651.JPG

Starting along one corner, tie the co-ordinating strips (top and bottom) in a double knot, easing the pillow into place as you go. Some movement of the pillow form is possible and is ok.

DSCN6653 (2).JPG
DSCN6654 (2).JPG

And you're done!!!! In no time at all, and with little effort, you've created a family treasure ..... a momento of a loved one.