No Soldering!!Cheap Burning Altoid Laser!!!

This is a burning blue laser made in an altoids tin.
The parts were $43 total and this laser, is BEAST!!

Parts
1. Altoids tin- $3
2. Laser module-$38 http://m.ebay.com/itm/110886777102?nav=SEARCH

3.switch-0.99 http://m.ebay.com/itm/250973270098?nav=SEARCH
4. Battery pack-0.91 http://m.ebay.com/itm/310496351139?nav=SEARCH

This is the instructional video: http://www.youtube.com/watch?v=Y7JavGjcb0Y this was made by styropyro and I credit him

You will need...
Soldering iron(optional)
Drill/ dremel
Electrical tape

Tie 1 red wire to one side of the switch and the other to the other side. Solder if possible.
Tie the 2 black wires together and cover with electrical tape if you can't solder. Then, drill a hole in the altoid tin for the module. Then drill another for the switch.

Now that you're done, you press the switch and the laser will come out!(Be sure the battery pack switch is turned to on) always be sure to wear safety goggles!!!

If you want to see the more descriptive instructions, watch the video,




Please vote for me in the contest!!
Thanks in advance!!