Nokia 3310 Acceleration Logger
How to make a acceleration logger in a Nokia 3310 cellular phone.
I will use it to measure the forces on roller coasters :)
I will use it to measure the forces on roller coasters :)
Tools You Need
Some tools you might need:
nokia 3310
soldering iron
T6 screwdriver
material to make PCB:s or a "board house"
some materials to mount on the PCB:s
a stationary drill and some mill and drill bits
a spare nokia 3310 lcd if you brake it :(
a microSD card
uALFAT chip from ghielectronics to handle the microSD card
Microchip PICkit2 to program the uP
External sensor, reused from a previous project
nokia 3310
soldering iron
T6 screwdriver
material to make PCB:s or a "board house"
some materials to mount on the PCB:s
a stationary drill and some mill and drill bits
a spare nokia 3310 lcd if you brake it :(
a microSD card
uALFAT chip from ghielectronics to handle the microSD card
Microchip PICkit2 to program the uP
External sensor, reused from a previous project
Dismantle the Phone
Begin to dismantle the phone and reuse the part you need (shell, frame, battery, buzzer and battery connector).
Make Some PCB:s
Make the PCB:s your self or let a "Board house" do them for you.
The file for the PCB:s are right here:
The file for the PCB:s are right here:
Downloads
Finnish the PCB:s
Solder on all components on the PCB:s and make some modification :( .
Mill and Drill
Mill and drill the shell and frame to make room for everything new :)
Reassembly
Reassembly the unit again. Make sure that everything fits. And finally, connect the battery and program the unit. The software is not really completed, bugs to fix :(
Testing
Now we can test the unit.
The Result
