OO Scale to HO Scale Coupler Carriage

Hi there This instructable is on how to create a way to convert your HO model trains to OO scale, or vise versa. -MATERIALS- To complete this project you will need- -HO knuckle coupler - OO coupler equipped carriage -pliers - super glue -Small vice (optional) -persistance! (Mandatory)

From the scrap pile The carriage i used to convert my set was an old Hornby maintenance caboose that i bought at a school fete. It is better to have a OO carriage to convert, but any will work.

Ro begin the conversion, we start by removing the old OO scale coupler on one end if the Carriage. I did this with a good pair of long nosed pliers. Try not to damage the carriage!

Now, the important (and slightly frustrating!) bit. Ready your super glue and your HO coupler as this bit involves both. First, squeeze a few drops of glue onto the place where the old coupling was then place the new coupler in the exact position of the original. Wait a few minutes for the glue to dry then apply a few more drops of glue.

When your glue is almost dry (be careful- fingers might stick!) check the alignment of the coupler as it may have moved. When the glue is dry, you are done! I waited a few minutes before use, just to allow full glue cure.

You have now finished your HO to OO scale converter wagon!