OSCAR Shaped 3D Printed Flash Drive With Key Ring
by Miss Flash Drive in Workshop > 3D Printing
568 Views, 3 Favorites, 0 Comments
OSCAR Shaped 3D Printed Flash Drive With Key Ring
At customflashdrive.co.uk we have launched a 3d print your own section, where you can download the stl files for a couple of euros. Still I am trying to share some stl files of these name flash drives here and there for free.
Set Up Your 3D Printer
I recommend the following cura settings:
layer height / resolution: 0.2 mm
wall thickness: 0.8 mm
infill: 15%
no support is needed
combing enabled
Here in the stl file, which is already repaired, there is an extra key ring. So it is slightly different.
Downloads
Choose Usb Memory Stick
At http://customflashdrive.co.uk we are referring to an amazon site where you can find a memory stick which suits perfectly to the hole.