Dropping Drone

Now a days drone is use in every field like Videography, Small Object dropping, IN army for surveillance etc. This is the Object Dropping Drone. By using this drone you can drop objects like Chocolate, Flowers,Colors etc. To make this drone few basic things required. Here by this I will tell you how to make this drone. Well you can use this drone in party's, Picnics, Public place, Christmas party etc.

• S500 Quadcopter super combo v2
• LiPo Battery 11.1v 35C 3S
• 13g Servo motor
• Transmitter & Receiver
• Li Po charger
• Velcro
• Female to Female Hookup Jumper wire
• Thread
• Small pics of round wood
• Glue Gun
• Semi Flexible cardboard
• Cable tie

Set Quad copter flight controller as given instruction.

• Page 1
• Page 2

Once you connect all wire of ESC, Motors etc. with the QQ Thunder. Do not Connect propeller right now.

Connect ESC and Reciver.

• Connect receiver 3rd Channel to THR channel of QQ Thunder.

• Connect Receiver 4th channel Signal pin to R. channel of QQ Thunder.

• Connect Receiver 1st channel Signal pin to A. channel of QQ Thunder.

• Connect Receiver 2nd channel Signal pin to E. channel of QQ Thunder.

Diagram Image is there check from it.

set gain port in between 25% to 50%. for beginner. Later on you can change it as per your requirement.

Video Link 1 Intro to QQ Thunder Flight Controller Board.

Video Link 2 Intro to QQ Thunder Flight Controller Board.

For Connection Refer this link. (Check 3rd photo in link)

Thank you Hobbyking and firestartergmh for this video.

Thank You Paweł Spychalsk from https://quadmeup.com

Create Storage Box by using Cardboard as per Images.

Put servo as per Image. And also put thread around wood and fix its one end with storage box gate & other one with servo shaft.

Fill storage box with pics of paper to test. once test replace paper with your actual item.

See video of this.