Virtual Obstacal Avoiding Robot- TinkerCAD

by ayushraj9 in Circuits > Arduino

338 Views, 1 Favorites, 0 Comments

Virtual Obstacal Avoiding Robot- TinkerCAD

Circuit design Obstical Avoiding Robot

This is a simple Virtual Circuit of an obstacle-avoiding robot. In this Circuit the robot turns left if the distance between the robot and an object or an obstacle is less than 10cm or else it will move straightly

Components Required

Arduino UNO.png
breadboard.png
L293d.png
Hobby Motor.PNG
Ultasonic distance sensor.png

The following components are required for this circuit:

  1. Arduino- 1nos.
  2. BreadBoard- 1nos.
  3. L293D- 1nos.
  4. Motor- 2nos.
  5. Ultrasonic distance sensor/Sonar Sensor- 1nos.

Connections

Circuit.png

Make the following connections as shown in this image using TinkerCad Software

Code

Codeblocks.png

assemble the following code blocks as shown in the figure using TinkerCad software