Obstacle Avoiding Robot

This Instructable Article is ABOUT THE Virtual Obstacle Avoiding Robot which makes the circuit to move forwards when the distance is greaer than 15 cms between the Robot and the Object else it will make the robot to go left.

The following are the components required:

# Arduino UNO - 1No.

#Breadboard - 1No.

#Motor - 2No.

#L293D Motor Driver - 1no.

#Ultrasonic Sensor - 1 No.

Connect the following connections as shown in the above pic using the TinkerCAD Software.

Assemble the Code Blocks as shown in the above image using TinkerCAD Software