Operating the Object Connex 500

Use this lesson as a reference for order of operations when cutting on the Epilog Laser Cutter.

1. Prepare the model.
2. Select a printer.
3. Insert (open) the model.
4. Set tray and material options.
5. Send the tray to the Job Manager.

1. Run the Job Manager.
2. Bring the printer online.
3. Record the resin usage.
4. Start the print job.

1. Remove your part from the machine.
2. Clean the machine.
3. Clean your part.

This course is available as a PDF that is attached to this step. Happy printing!