Origami Balloon

by sebnibo in Craft > Paper

788 Views, 2 Favorites, 0 Comments

Origami Balloon

temp_2004652559.jpg
temp_-258736501.jpg
Difficulty Level
1/5

Material

temp_1846058725.jpg
You will need a square sheet of construction paper

Folding

temp_245344452.jpg
temp_-132522060.jpg
temp_-1131653583.jpg
temp_-1725981740.jpg
temp_2023205718.jpg
temp_1091581496.jpg
temp_1717207079.jpg
temp_-389547923.jpg
temp_-175391219.jpg
temp_-840684226.jpg
temp_-1844592446.jpg
Fold the paper in half both diagonally, vertically, and horizontally. Then take the points that were circled in the picture and pinch then together. That will cause the top to buckle, when it does just push it down flat.You should have a triangle with four flaps. Take a flap and fold it's tip to the top of the triangle. Fold the right corner of the flap into the middle and take the top corner and fold it down into the pocket directly in front of it. Repeat for all four flaps

Finish

temp_1600791125.jpg
temp_-1760699045.jpg
Blow some are through the hole on the top and watch your paper inflate.Thanks for reading if you have any questions please leave a comment