Origami Hat for Pets

This tutorial will show you how to to make an origami hat for your pet.
Materials:
- 1 piece of 8 1/2" x 11" paper
- 1 stapler (with at least 2 staples)
- 1 rubber band
​Fold the Top-right Corner of the Paper Down As Shown in the Image.

Fold the Bottom Strip Up to Form a Crease Along Which You Can Tear.

Tear Along the Fold. You May Want to Fold the Flap Back and Forth Until It Becomes Easier to Rip.

Keep the Square Piece of Paper. You May Discard the Rest.

If Your Paper Is Not Already in a Triangle Form, Fold Along the Existing Crease to Make a Triangle.
.jpg)
Fold One Corner From the Solid Side to the Point of the Open Side.

Repeat With the Other Corner.

Fold the Flaps Up From the Creased Side to the Tip of the Open Side.
.jpg)
Your Hat Should Look Like This:

Fold the Corners Out As Shown Below.

Your Origami Should Look Like This:

Fold One of the Flaps From the Bottom Up So the Tip Is Near the Middle of the Upper Triangle.

Fold Upward the Remaining Section of the Flap You Just Folded So That It Fits Flush With the Rest of the Upper Triangle.

Flip Over and Repeat Steps 12 and 13.

Open the Hat and Re-fold It So That the Lower Left Tip Is on Top of the Lower Right Tip.

Your Hat Should Now Look Like This:

Fold Up the Bottom Corner. This Will Cover Up the Staple That Will Hold the Rubber Band in Place.

Flip Over Your Hat, Repeating on the Reverse Side.

Open Your Hat Again. It Should Look Like This:

Hold the Rubber Band on the Inside of the Side of Your Hat As Shown in the Image.

Staple the Rubber Band So That the Staple Can Be Covered Up by the Flap on the Side of the Hat.

Repeat on the Other Side.

You Can Place Your Hat on One of Your Pets or Use It As a Decoration.

Enjoy!
