PC Building Instructions

How to build a PC

You will need the following parts to complete your pc build

• Motherboard
• CPU
• Heat sink + Fan
• RAM
• Computer Case
• Hard Drive
• Power Supply
• Graphics Card

Pull up the CPU lock down arm

Align the CPU using the golden triangle.

Be careful not to force the CPU into the socket.

It should just drop in without any resistance.

Push down the CPU lock down arm.

Apply a pea sized dab of thermal paste in the center of the CPU

Align the clips and lock down the heat sink

Align the notch on the RAM module wit the notch on the motherboard's DIMM slot.

Press down until you hear a click.

Install the standoffs to match your corresponding motherboard.

Install your I/O shield with the proper orientation.

Be careful not to cut yourself on the sharp edges.

Align the motherboard with the standoffs and put in the screws

Align the power supply and insert the 4 screws at the back of the case.

Connect the front panel cables, 24pin power cable, 4 pin cable, and speaker

Tuck away as much of each cable as you can

Screw in the fan with the label facing the outside of the case.

Plug the chassis fan into the System_Fan_1 pins.

All done!