PVC Bow
My homemade PVC bow! Shoot Practice arrows or homemade arrows through boxes! Cost less than $5 !!! .............DISCLAIMER: MAKE NO MISTAKE, THIS IS A WEAPON. DO NOT SHOOT AT ANYTHING FRAGIAL OR ANYONE. IF ANY PROBLEM OR DESTRUCTION IS CAUSED BY THIS, I CLAIM NO RESPONSIBILITY.
'
'
WHAT YOU NEED!
WHAT YOU NEED!
4 ft. of 1/2in. PVC (ALSO HAD ALOT OF THIS)
duct tape
elastic string( i used this cause i have alot of it! use nylon its better!!)
knife
1 panel nail
Practice arrows'
4 ft. of 1/2in. PVC (ALSO HAD ALOT OF THIS)
duct tape
elastic string( i used this cause i have alot of it! use nylon its better!!)
knife
1 panel nail
Practice arrows'
Cut the PVC
Cut a slit into each side bout a 1/2in. in.
Make
sure
its
wide
but
not
to
wide!!'
Make
sure
its
wide
but
not
to
wide!!'
Measure the String
Cut the ELASTIC exactly 1ft smaller than the PVC !
Loop both sides and put it in the notching.
Then connect the other side! And make sure when the string want stretch no more!'
Loop both sides and put it in the notching.
Then connect the other side! And make sure when the string want stretch no more!'
Finishing the Final Touches
Duct
tape
the
handle!'
tape
the
handle!'
Your Finished!!
shoot Arrows through boxes with this bow!! '