PVC Flag Poles

Have you ever heard that you can make anything with PVC well you can and here's how you make a PVC flagpole.

Materials

All of these PVC pieces should be the 1 1/2 inch PVC

2 Four Feet pieces of PVC

6 Six inch pieces of PVC

2 Twelve inch pieces of PVC

1 PVC Double connector

3 PVC T connectors

4 PVC Elbow connectors

1 PVC cap

2 Eye screws (Preferably 5 mm)

2 Climbing clips

Step one

Put the base together as seen in the picture.

Step two

Put one of the four foot pieces into the base. As shown in the picture.

Step three

Attach the double connector to the top of the four foot piece

Step four

Drill 2 holes into the other four foot piece and screw your eye screws into the holes and clip the clips onto the screws.

Step five

attach the drilled four foot piece to the double connector and place the cap on top of the pole and you are done.

Sorry that it is sideways