PVC Laptop Stand
A laptop stand with cable routing for under $5 bucks. No gluing necessary. Save deskspace. Save your neck. Save your eyes. Etc.
Cut PVC to Length
You will need
Six 5 1/2 " by 3/4" pieces
Two 11" by 3/4" pieces (for a powerbook, for a dell 14 inch make these two pieces 7" to 8")
Four Tee Joints
Four Elbow Joints
Six 5 1/2 " by 3/4" pieces
Two 11" by 3/4" pieces (for a powerbook, for a dell 14 inch make these two pieces 7" to 8")
Four Tee Joints
Four Elbow Joints
Planar
Assemble two "shelves" like so.
Route Cables
Route the cables through the bends as shown. USB connectors will fit with a little nudging. If you use those nifty CAT-5 adapters, you can snake VGA or DVI cables through this rig.
Snap Together
No glue necessary! Friction should do you fine.
Place Laptop
All done. No reason to be straight. Like MJ, this thing can do a supernatural lean. Sweet.