PVC Pipe Nunchucks for Under $10

Everyone wants to be a ninja, and now you can with these awesome nunchucks! Thanks to TH3 R4ND0M H3R0 who was the co-creator in this project.

The stuff you need for these chucks are

2 - 14" pieces of 1/2" PVC Pipe
4 - 1/2" PVC end caps
2 - 1/4" x 2" Eyebolts with nuts
1 - 6"-7" piece of chain
2 - 12" pieces of foam pipe insulation (optional)

Drill a hole in the middle of 2 end caps that the eyebolts can fit snugly into

Use your manly muscles and pry the eyebolt apart so you can fit the chain on it. (do this with both)

Stick the eyebolt through the two drilled end caps, and secure them tightly with the nuts.

place the end caps on the PVC pipe. ( you might want to use some pvc cement for extra stability)












FISH ><)))">

Cut lengths of foam tubing to fit around the nunchuck handles so they don't kill you. and your done!