Paper Circuit

 I will teach you how to make a simple paper circuit.

Supplies:
Paper
Graphite pencil
9volt battery
gator clips
L.E.D.

now use the graphite pencil and create a maze kike the one shown(make sure the lines are consisted of multipal layers.)

At the end of the circuit(the end is the side without the - and +) then tape the led so that the one of the prongs touches one of the graphite lines, and the other prong the other graphite line.

Now connect one side of the two gator wires to the circuit. Each gator clip should be connected to one of the positive or negative blocks. now take the 9 volt and connect the gator clips that has one side attached to the positive block to the positive side of the batter. Now do the same thing for the other except do for the negative side.

Now your done. You can also make a flashlight by rolling it up. Have fun!