Paper Clip Launch

by nojack in Craft > Cardboard

2206 Views, 6 Favorites, 0 Comments

Paper Clip Launch

13, 7:52 PM.jpg

Things You Will Need

13, 7:52 PM.jpg
13, 7:52 PM.jpg
1x paper clip

1x rubberband

Preparing the Paperclip

13, 7:52 PM.jpg
13, 7:52 PM.jpg
Point the paper lip so that two round loops are facing to the left. Next, bend the wire that is not inside up.

Preparing the Paperclip Pt. 2

13, 7:52 PM.jpg
13, 7:52 PM.jpg
Now, bend the top wire down. This creates a notch to slide the rubberband into.

Finishing the Paperclip

13, 7:52 PM.jpg
13, 7:52 PM.jpg
Bend the bottom inside wire 180 degrees to left, which makes our dart complete.

Have Fun!!!

13, 7:52 PM.jpg
Shoot it around and show it off to your friends.