Paper Crown

Here's how to make a cool paper crown! These two are Unus Annus and Markiplier/Crankgameplays fanart crowns.

-Paper (notebook paper, newspaper, colored paper, etc.)

-Scissors

-Pens/markers (optional)

-Tape (optional)

-Ruler

Measure a 4x4 inch square of your paper. If you are using standard size (12x9 inch) paper, you will get 6 squares per page.

Fold it in half so that it looks like a triangle. Crease, and unfold.

Fold as shown in the images.

This is what it should look like so far. Repeat for as many pieces as you need. For the Mark/Ethan one, I used ten and it is just slightly too small. The Unus Annus one is 11, and it fits perfectly.

Slide the corner point of one, into the slot of another. Hopefully, the pictures show it well enough.

This should be the end result. Use tape on the inside to hold it together. Thanks for reading! If you have any questions, I'd be happy to answer them in the comments. Have a good day, and enjoy your crown!