Paper Favor Boxes

Create these unique and easy-to-make paper favor boxes for all occasions and special celebrations. Use the templates provided in this Instructable or get creative and design your own for bridal showers, baby showers, birthday parties, weddings, Halloween treats, bake sales and more. The possibilities are endless !!

Plain paper

Templates (in next steps)

Printer

Double-sided Tape

Paper Cutter, Scissors

Small candies

Click on any of the patterns above and hit 'print scrn' on your keyboard then copy and paste it into Photoshop (or other photo editors). Resize the image so that they are each 4 X 4 inches in size (or whatever size you want your boxes to be)

Click on any of the patterns above and hit 'print scrn' on your keyboard then copy and paste it into Photoshop (or other photo editors). Resize the image so that they are each 4 X 4 inches in size (or whatever size you want your boxes to be)

Click on any of the patterns above and hit 'print scrn' on your keyboard then copy and paste it into Photoshop (or other photo editors). Resize the image so that they are each 4 X 4 inches in size (or whatever size you want your boxes to be)

• Two box templates will fit on a standard 8.5x11 sheet of paper
• For optimum results, use the 'best' setting on your printer and highest quality paper
• Colors may vary depending on your computer screen settings
• Quantity will depend on how many boxes you plan to make
• Use a paper cutter (or scissors) cut out the boxes
• Notice that the temples with faces are slightly off center. This is to ensure the faces are centered once the favor boxes are folded

• Place a strip of double-sided tape along the front left side of the printed square
• Roll the wrapper over to form a cylindrical tube and gently press together

• With the face facing to the front, place a small piece of double-sided tape to the inside of the top end of the box tube
• Seal that end of the box by gently pressing together

• Fill your favor box with small treats; M&Ms, Skittles or Candy Corn ... etc ....
• While holding the sealed end, place a small piece of double-sided tape to the open end of the tube and seal by gently pressing together
• Make sure this closure is perpendicular to the opposite end forming a triangular shape