Paper Spiral

by helloperson4 in Craft > Paper

4043 Views, 1 Favorites, 0 Comments

Paper Spiral

SAM_2214.JPG

Drop a tiny marble in and it comes out the bottom. This project is very easy to make and fun to play with.

Materials

SAM_2194.JPG

You will need

  • Paper
  • scissors
  • tape
  • a tiny marble

The Tube

SAM_2195.JPG
SAM_2196.JPG
SAM_2197.JPG

  • Fold over a piece of paper.
  • Cut the piece out
  • roll it into a tube about the size of a straw

The Ramp: Part 1

SAM_2198.JPG
SAM_2199.JPG
SAM_2200.JPG

  • Fold over a piece of paper about twice the size of the other
  • Cut it out
  • Fold the paper in half

The Ramp: Part 2

SAM_2201.JPG
SAM_2202.JPG

  • Cut little slots into 1 half of the paper
  • do this through the entire piece

The Ramp: Part 3

SAM_2203.JPG
SAM_2204.JPG

  • Tape the slots together
  • Do this for all of them

Attach

SAM_2205.JPG
SAM_2214.JPG

Tape the ramp to the tube at an angle, if needed when done, cut the end of the tube off.

Finished

SAM_2214.JPG

Now you can roll the marble down the ramp and have it come out the other end.