PaperCraft Minecraft Light-Up Torch

In this instructable I will show you how to create a MMinecraft Torch that lights up and all!

----------------------------------------

You will need:

1 piece of cardstock paper

A color printer

A flashlight

Tape

-----------------------------------------

Print Out a Net

You can do this in paint. Go on Google images, and download a picture of a torch. Open it up in paint ,drag the canvas to the right about 5 times the width of the torch, and duplicate it 3 times. Place all the duplicates together, and leave no spaces in between. Then duplicate the top of the torch(the orange part), and place it above the top right corner. Do the same for the bottom two pixels of the wood part. Put this one on the bottom on the opposite side. No use the select tool and select the whole torch net. And rotate it 90 degrees in either direction. And re size it to fit the whole paper. Now save it and print it out.

Cut Out the Net

Now cut out the whole net. Only cut out the white, blank paper.

Fold the Paper

Fold the paper at every two pixels, and fold down the top piece and bottom piece that sticks out. Make sure you fold it inwards.

Tape the Folds

Now place tape on the inside of the paper. This is so you wont see it later. Do not tape the bottom yet.

Insert Flashlight

Turn on the flashlight and insert it into the bottom flap of the torch. Then tape the flap.

Let It Glow

Enjoy!