Paper Shot Gun

This is my first Instructable, so critiscm is welcome. Today, I'm going to show you how to make a paper shotgun. It does NOT shoot.

Ok, here are the materials you will need:

-Some normal sized paper
-Some Large Paper
-Tape
-Old Tape roll (optional)
-Pencil (if using tape roll)

Alright, take both papers and roll them inton a circle. If you want it to be large and very even, use the tape roll and wrap the paper around it, then poke out the ta roll. Tape the rolls so they don't unravel. Now tape the rolls together, it should look like this:

Ok, now you will need to make two more rolls. Make them small enogh so they fit in the barrel rolls. Now take 1 peice of large paper anf rap it around the Barrel. It should look like this:

Now for the Stock. Make a roll that can fit into the top of the barrel. Then take a few peices of paper anf make the size you want an put it around the roll. The tape it on the Barrel. It should look like this:

Now, this is the last part, the pump. It will not go back and forth but will look like a pump. First, fold the paper yhamburger stlye, the fold it hamburger stlye again. Then just tape it to the gun. Oh ya, the handle is that spot right under the stock. And your done, ENJOY!!