Paracord Bracelet Pattern

Hello! This instructable is going to be about a paracord weave I discovered when I messed up a survival bracelet. This is just the weave, so I'm sure some of you DIYers out there could find tons of cool uses for this. I have made bracelets, chokers, lanyards, and other stuff, so feel free to modify the crap out of it! Also, this is my first instructable, so leave feedback please!

There are probably tons of better ways to set this up, but I just found the half way point of the rope and tied a loop.

You have 2 strings. Take the right string and pass it under the left string, making a loop on the right. Then pull the right string through that loop and tighten it.

You now have a string that goes straight down and a string that sticks out a bit. Use the string that goes straight down (the left string in this case) to make a loop by going behind the right string, and pull through the loop like you did with the first knot.

Continue alternating sides with the loops. This is a fairly simple braid, but it looks kind of cool and is nice and flat for necklaces or bracelets. Thanks for listening!