Parkinson Smilator(Tremor)

It is a device that simulates Parkinson's disease

WARNING THIS PART IS DANGERAUS

Make the process outdoor

Use safe gloves, safe goggles and mask

Put the piece in very little water. Dry the inside of piece(3d print mold). Pour the molten lead. Do not smell steam.

Wait a few minutes to cool down. Do not touch it until you are sure it is cold.

I use 12volts DC Gearhead 100 rpm electric motor but 12v not enough for turning lead weight. So I use a 19 volt laptop adapter

Make strap with velcro