Photo Frame

by chielboogaard in Living > Relationships

3104 Views, 2 Favorites, 0 Comments

Photo Frame

step 6.png
This is a Photo Frame I made with 123D design. I got this idea while someone just broke a nice photo frame, so i thought lets make one that is cost customizable. So I used 123D Design to create a customizable, better and more durable Photo Frame. the photo frame is based an a standard Photo of 13x9cm of 9x13cm (5.1''x3.5'').

I do not have a 3D printer so i can not tell you how long it will take to print this but i think about 2 to 4 hours.

If you like this project, please vote for it in the 123d Autodesk project. Also, make sure to download 123D Design application at http://www.123dapp.com/design.

Fromat of the Photo

step 1.png
13cm x 9cm

Making the Outside Shell

step 2.png

Making the Photo Gab

step 3.png

Choose of the Photo Groove

step 4.png

Photo Frame With in Groove

step 5.png
slightly smaller then the real photo

Making the Stand Up for Long Photos

step 6.png

Made the Groove for the Stand Up

step 7.png

Making the Photo Frame Ready for the Second Groove (long Photos)

step 8.png

Aligning the Stand and Photo Frame

step 9.png

Made the Groove

step 10.png

End Result

step 11_2.png
step 11_1.png
step 11_3.png