Plant Waterer
I made this... thing becuase I wanted my plant getting most of the water... Not all of the other plants getting it...
Pieces:
- Paper cup
- Drinking Straw
- Scotch Tape
Pieces:
- Paper cup
- Drinking Straw
- Scotch Tape
The Structure
Take some scissors and poke a hole a little bit smaller than the straw. Then push the straw through. Make sure the straw isn't sticking out to far out of the bottom of the cup. It should be a tiny bit higher than the cup.
Making It Sturdier
Cut some strips of tape. Make them stick to the cup and straw. Cut about 6-8 strips.
OPTIONAL
You can decorate it. Just get some markers and color!! :D. I am "so" artistic. Be jealous. -.-
Tips
TIPS
1. When you put it into your pot, don't shove it. Just handle it carefully.
2. When you pour in the water in to the filler, Do it slowly so it builds up, if you pour to much at a wrong time, it will get ugly.
3. Don't be rough.
4. Pls give me suggestions.
1. When you put it into your pot, don't shove it. Just handle it carefully.
2. When you pour in the water in to the filler, Do it slowly so it builds up, if you pour to much at a wrong time, it will get ugly.
3. Don't be rough.
4. Pls give me suggestions.