Planting Annual Flowers in Beds

by 4me2no88 in Outside > Backyard

2060 Views, 4 Favorites, 0 Comments

Planting Annual Flowers in Beds

temp_187864812.jpg
temp_93848047.jpg
temp_1533056239.jpg
temp_2021279176.jpg
temp_5835397.jpg
temp_730180918.jpg
temp_898269392.jpg
temp_1220485057.jpg
temp_1867125739.jpg
temp_30158613.jpg
Flower beds full of colorful arrangements of annual flowers are the perfect way to grab the attention of guests and add curb appeal to your beautiful home.

Planting flowers may seem overwhelming but I'm here to help you through this. In my opinion the hardest part is deciding on the plant material that you like the best (that will thrive in your region)

Chances are if you are reading this that you love working in your yard and adding that personal touch to your home. So let's dive right in!

Decide What Plant Material You Want!

temp_1226662888.jpg
Your decision on plant material is what makes your beds unique. There are many to choose from and no wrong answers when choosing as long as they will thrive in the area that you plan to put them.

The most important thing to consider is whether the plants need full sun or part sun. You also want to pay attention to how much water each plant requires (if planting multiple types of flowers).

If you decide that you want multiple types of flowers, the best advise I can give is "Think Layers". You want to be able to see everything so you want to place the taller varieties in the back and work your way down to the shorter varieties in the front.

These are all things to consider when selecting the plants. Once you know what you want the hard part is over.

Prepping the Bed

temp_1135028713.jpg
temp_1488815141.jpg
temp_642804175.jpg
temp_777214376.jpg
The first thing you want to do is make sure the area is free of weeds. This is a dreaded task for many but is crucial unless you want a bed that is full of weeds.

Next you will want to cultivate the soil. While cultivating with a tiller do your best to avoid compacting the freshly tilled soil by walking on it.

After cultivating the soil smooth it out with a rake. Try no to walk on the soil while doing this either. (I realize that sometimes there is no way to reach across bigger beds without stepping in them)

Adding Fertilizer and Pre Emerge

temp_1167544261.jpg
temp_445533552.jpg
temp_1898177349.jpg
temp_645582469.jpg
Fertilizing is an important step because plants need more than just water if you want them to flourish. I use Osmocote Classic 14-14-14 which is a slow release plant food.

Another important step is pre emerging because let's face it, no one really likes to pull weeds. I use Snapshot or the generic for Snapshot which in this case is Quali Pro T/I 2.5G.

To apply the pre emerge you will need a seed spreader like the one in the picture. The pre emerge is in granular form which is almost as fine as sand. Make sure to spread out a thick even coat on top of the soil.

The seed spreader is not required to fertilize but is helpful if you have one. If you don't have a seed spreader you can just sprinkle it throughout the bed by hand.

Arranging the Flowers

temp_898746368.jpg
temp_1493785920.jpg
temp_1657202186.jpg
temp_2102143600.jpg
temp_1528253206.jpg
I recommend laying all of the flowers where you think you might want them before you start planting.

The first reason is so that you can make sure that you have enough plants for the area that you are trying to cover. Sometimes you get to the end and wish you had just a few more plants; but if you lay them out first, you can rearrange to accommodate for the missing plants. (sometimes you just need more plants for the desired look)

The second reason is so that you can adjust your plants to line up better. The flowers should line up in rows but should also line up diagonally... So if you look from the side you should see the rows line up but if you look at the bed from an angle they should line up also.

But in the end there is no wrong way to do it. It's all about personal preference. Have fun and be unique!

Time to Put Them in the Ground!

temp_250438039.jpg
temp_1032877873.jpg
temp_535271660.jpg
We finally made it! It's time to get these flowers into some dirt.

You should already have your plants arranged so we can jump right in. If you cultivated properly you shouldn't need a small shovel to plant them. You should be able to dig holes easily with your hands. Of course a small shovel is helpful and faster.

When planting make sure that the holes are at the correct depth. They need to be just deep enough for the root ball to be covered. Once you place plants in each hole you want to cover the roots with dirt and press the roots down firmly. Then just smooth the soil out a little bit and move to the next plant.

Give Them a Good Soaking

After planting everything you will want to soak everything in really well. If you have an irrigation system or a sprinkler let it run for about an hour if soil is dry. Even if it's not dry I would at least run it for 30 minutes. After all of your hard work it is important to take care of your plants once they are in the ground

Enjoy the View

temp_871021622.jpg
temp_473840803.jpg
temp_1789343627.jpg
temp_1932886643.jpg
temp_2029788782.jpg
temp_1914820597.jpg
temp_1775349350.jpg
temp_1100668777.jpg
temp_1298670286.jpg
temp_727581407.jpg
temp_1890840279.jpg
Now you can relax a little bit and enjoy your creation! It's always rewarding to see a flower bed come to life. I receive a lot joy knowing that I created a work of art that is beautiful and unique. I hope you will feel the same way.