Plasma Cut Signs

I am going to show you how I get all my signs set up for the plasma cam to cut.

I wont have pictures of it actually cutting but I'll show the steps needed to get everything ready for the plasmacam to cut it.

You will need a plasma cutter and also the plasma cam software.

1. Find a picture you like!
2. Logos are the easiest to work with, so I took the cubs logo.
3. Then after you find the pic you want cut out of metal save it to your computer

1. Open your file in paint

1. Save make sure its a monochrome bitmap file

1. This just makes the plasma cutter able to know where to cut, note: you will have to do this or it wont cut

Its that simple!