Pocket Hole Drilling Station

I have a little cheap pocket hole jig, but for this one I need always a clamp to fix it.

So I decided to build a little jig for this jig.

It is designed for my "clamping box" but you can it easily adapt to your workbench.

But I have also an Instructable for my "clamping box"

My pocket hole jig has a little shoulder of 6 mm, therefore I glued two boards of MDF with 6 mm thickness left and right from the jig.

I screwed 3 little boards of plywood on the back of the main board to build a little pedestal to support the toggle clamp.

I put the pocket hole jig and the toggle clamp in there position and then I screwed the toggle clamp on the pedestal,

I put a big drop of hot glue on the pocket hole jig and then I pressed the clamp down and waited until the glue was cold.

Here you can see how the jig is fixed on my workbench.

You can easily lift the clamp and adjust the drill if it is necessary.

Instead of thousand words, please watch the video

If you use a mobile device, use this link .

If you want to see more of my work, subscribe to my YouTube channel.