Pop Top Braclet

This instructable shows how to make a bracelet out of the thingys on top of soda cans.

Get a lot of soda can tops. I'm 13 and I used 14 on this one. I used 17 on my other one so get 25 and you should be okay.

You also need string.

And scissors.

Put the loop through the top hole as shown in pic 1

Put the 2 ends through the loop as shown in pic 2

go around the sides and down through the bigger hole.

put the string down into the smaller hole, around the side to the top, and down through the big hole.

Repeat on other side, and pull tight.

Repeat steps 4 and 5 until desired length.

once it's long enough,put the string down and throug as you would (pic 1)

tie a pretzel knot around the side of the pop top

Cut off the exess and you are done.
Show off as much as you want.

I just finished doubling it and taking pics, so the 'ible will be up in a matter of days.