Portable Bandsaw Mount

Build a mount and table for a portable bandsaw.

Dig up scrap wood and metal.

Fit a piece of metal under the bandsaw handle.

Cut wood to fit on both sides of the saw handle.

Screw the metal to the wood pieces.

Slide the mount under the handle and snugly in place and adjust for fit.

Remove the bandsaw shoe.

Trace the shoe onto a metal plate.

Drill and file an inlet for the bandsaw blade.

Drill screw holes

Replace the stock screws with countersunk head screws. Countersink the holes and test for fit.

Sand the surface of the plate and apply a coat of wax.

Attach the plate to the bandsaw.

Drill bolt holes in the mount and into a bench apron. Insert the bolts into the apron.

With the mount inserted into the saw handle attach to the bolts in the apron. Fasten tightly. Use a clamp to hold down the power switch.