Project BOX K'nex Ball Machine

My smallest Ball Machine to date. Also, this is my final tiny ball machine. From now on, I go bigger (no pun intended).

Pieces:

Red Rods: 3
Yellow Rods: 20
Blue Rods: 197
White Rods: 58
Green Rods: 100
Blue 3D Connectors:20
Purple 3D Connectors: 103
White 8-Slot Connectors: 39
Yellow 5-Slot Connectors: 56
Green 4-Slot Connectors: 6
Red 3-Slot Connectors: 19
Orange 2-Slot Connectors: 7
Gray 2-Slot Connectors: 1
Gray 1-Slot Connectors: 9
Tan/Brown/Orange Tabbed Connectors: 2
Motors: 1
Balls: 1
Blue Bearings: 7
Silver Bearings: 5
Gears: 4 Red
Chain Links: 35
Black Y Connectors: 2
Total: 695 Pieces

This is where the lift will be located.

This side will hold the wheel later on.

This side will hold the other stuff.

This part will support the chain.

This part decides where the ball goes.

This leads to the Wheel.

This part spins. Build, take out a blue rod, then put in the Wheel. Replace blue rod.

These two make the ball drop.

This part has 35 Black chain links.

Fix this part.

Add ball, Turn on.