Projector

materials: Magnifying glass, box, Xacto knife, pencil, scissors, tape, and a ruler

get a box (it needs to be big) and trace a circle around the magnifying glass. (note: I would recommend getting a smaller magnifying glass than the one used in the photo), in this case, I have two magnifying glasses for a better resolution, but you don’t need to have two.

get your Xacto knife and cut out the traced line.

get your magnifying glass and tape it on the box

you are done with the box, but you’ll need to make a stand for your phone. Get a piece of cardboard and cut 2-4 cm wide and a height of 10-12 cm around strip of cardboard, you’ll need to fold the cardboard piece about ¼ of it, then you’ll need a smaller strip of cardboard with a height of 3-6 cm and a width of 1-3 cm, also you will need another strip and you will need to fold it in half and tape it in front of the stand, you should make two.

you will need to place the stand in the box like this and now you are done

you'll need to be in a dark room for this to work, you’ll need to turn up your brightness on your phone all the way up. You can move the position of your phone for a better resolution. And when you put your phone in the box you’ll have to flip it upside down.