Pumpkin Tie Dye Shirt

by AB Crafty in Craft > Fashion

1405 Views, 7 Favorites, 0 Comments

Pumpkin Tie Dye Shirt

FVRTA1UKUIDQBMH.jpeg

Learn how to make a tie dye pumpkin design on a shirt. Celebrate fall or Halloween with this unique pumpkin tie dye design.

Use the free printable tie dye template to make this and other Halloween tie dye shirts.

Supplies

  • Pumpkin tie dye template
  • 1 White Cotton Shirt
  • Washable Markers Orange and Green
  • 1 Needle and Thread
  • Rubber Bands or Zip Ties
  • 1 Small Clamp or Clothespin
  • Tie Dye Kit or Tie-Dye Dye and Soda Ash
  • Water
  • 1 pair Rubber Gloves
  • Plastic Wrap
  • Paper Towels

Draw Pumpkin Outline

pumpkin tie dye_1.jpg
pumpkin tie dye_3.jpg

Fold the shirt in half and draw half of a pumpkin using an orange washable marker (use this free printable template to make the design). Start with the outside outline.

Then if you want your pumpkin to have more details, add the stripes connecting the top and bottom.

Then use a green washable marker to draw the stem.

Sew Outline

pumpkin tie dye_4.jpg

Use a needle and orange thread to sew a running stitch along the outline of the pumpkin. Do the same thing for the stripes.

Pull and Tie Threads

pumpkin tie dye_6.jpg
pumpkin tie dye_7.jpg

Wet the shirt and squeeze out the excess.

Then gently pull on the threads to create folds in the fabric. Then tie the threads.

Repeat this for each thread.

For the pumpkin outline, I recommend pulling from each side instead of just one side to make sure the thread doesn't break.

Clamp Stem

pumpkin tie dye_8.jpg

Fold the stem along the line and use a clamp to hold it in place.

Tie the Rest of the Shirt

pumpkin tie dye_10.jpg

Crumple, twist, and scrunch the rest of the shirt however you would like. Then secure it with rubber bands or zip ties.

Soak in Soda Ash

pumpkin tie dye_11.jpg

Mix 1 cup soda ash with 1 gallon of water and let the shirt soak in it for at least 20 minutes.

Add Orange Dye

pumpkin tie dye_12.jpg

Cover your surface with plastic wrap.

Then, using a spoon, eye dropper, or squeeze bottle, add orange dye to the pumpkin section of the shirt. Be sure to fully saturate it and add dye to both sides.

Make sure the orange dye doesn't go into the stem area.

Add Green Dye

pumpkin tie dye_13.jpg

Add green dye to the sectioned off section for the stem.

Add Black Dye

pumpkin tie dye_14.jpg
pumpkin tie dye_15.jpg

Add black dye to the rest of the shirt. Be sure to not get the black on the orange and green sections. Use paper towels to wipe up the area.

Wrap and Set

pumpkin tie dye_16.jpg

Wrap it in the plastic wrap and leave it to set for at least 6 hours. It's best if it's 24 hours.

Rinse, Wash, and Dry

pumpkin tie dye_17.jpg

Rinse it in the sink until the water runs clear. Then throw it in the washing machine and dryer. Now your tie dye pumpkin shirt is ready to wear!