QUICK RELEASE STEERING WHEEL ADAPTERS

This is a quick connector to connect your wheel to a Racing Simulation device.

I designed my DIY wheel with a shaft that is 12mm and the wheel is Momo brand.

If your devices are not the same you can contact me by email at phanphamvietlong@gmail.com or my Facebook is Jensen Phan so I can customize it for your devices, and as if you don't like the name on the part, I will remove it for it.

EVERYTHING is FREE...

P/s: because of the Covid, my job is not stable if you are happy with this you can sponsor for me via Paypal: paypal.me/jensen01

Supplies

Steel ball 8mm: 8Pcs - Your can order: Amazon.com : stell ball 8mm
Spring steel: 4Pcs ( I took them from 4 ballpoint pens).

Download File for 3D Printer

We will download the file and unrar to slider G-code of 3 file(Slider, Base, and Shaft)

You can DOWNLOAD HERE: Quick connect Racing Simulation Wheel by long9a - Thingiverse

Print 3D File With Config Like Bellow

Print Settings

Printer: Anycubic Zero

Supports: No

Resolution: 0.2

Infill: 20%

Filament Brand: Noname

Filament color: depend on you

Filament material: depend on you - I used PLA

Notes:

Wall: 1.6mm for enough the torsion force when wheel working.

Insert the Steel Balls and Springs

Put 8 balls and 4 springs like the picture, and put the Slider part to the Base part.

Lubricant for Moving Part

I use cosmetic vaseline. Usually, it is white to transparent and odorless. It's cheap and available in all drugstores and cosmetics stores.