Quick Clock Face Design in ArtCAM

This can then be sent to your CNC machine and a hole drilled in the centre for the clock mechanism

Drag the image above into ArtCAM and set the size as you wish (I used 450mm x 450mm)

To do this, select the Bitmap to Vector tool. Reduce the colours down to two so it just has black and white. Make sure black is the selected colour and create vectors. You can use the default settings for it

Delete the clock hand vectors as the clock hands will be a seperate piece purchased from any hardware store

Create an Area Clearance using inner circle and four circles. The tool and settings below are what I have used, you can change these if you wish

Using a 12mm End Mill and a 3mm End Mill

Finish depth 3mm

Material is 25mm

Create a Profile cut on all vectors except for the circles above using a 3mm End Mill

Tip - If you dont want the waste pieces to fly from the machine, use bridges to leave some material which will keep it attached to the main piece, these then need to be snapped off once finished

Simulate this to check for errors and then save the toolpaths using your CNC found in the machine file format list