Quick Last Minute Bloody Tooth-Picked Wound SFX

In this project you will now how to make a quick last minute SFX tooth picked wound. Enjoy.

Here is what you will need for this project:

A tissue or paper towel.

Tooth pick.

Dick Blick Block Printing Ink paint (red).

Makeup sponge.

First, put a towel over your finger/thumb.

Next, put a small bit of paint.

Then spread it a little bit.

Your bloody wound is not done yet, but should look like this so far.

Split your tooth pick into two pieces.

Now your going to just going to push the tooth pick (non sharp side) onto your wound. if it does not stick, you can add glue/hot glue (be careful). You can even add the other half on the bottom.

There you go. Done. This is what your quick prop may look like if you copied off this project. You can even add a little bit of water drops to moist your prop. Or even if you have some fake blood, put a little bit on. Do what ever you want. This was just and idea, and was not meant to be perfect. I hope you enjoyed.

See my other instructable: https://www.instructables.com/id/Quick-Last-Minute-Bloody-Paper-Towel-Prop/