Rainbow Loom Diamond Pattern Bracelet

PLEASE follow and like!!! PLEASE give honest feed back! I'll try to fix any problems in my instructables. I will always take feedback in ALL of my instructables! Thank you!

YOU WILL NEED:
A LOOM
A HOOK
RAINBOW BANDS
CLIP

Make sure(if you're using the rainbow loom) your arrow is pointing AWAY from you! Place your first rainbow band from the bottom peg in the middle row to the bottom peg in the left row. Do the same to the right!

Now place another rubber band from your first rubber band to the middle row going diagonally

Now repeat steps 2 and 3 until you reach the top

Now take one of the top rubber bands off(either one works it doesn't matter)

Now flip your loom over so that your arrow is pointing AT you

Now reach into your last rubber band and and pull the top rubber band and loop it over to the peg to the left then do the same to the right

Now reach into the rubber band you looped first. Pull the rubber band and loop it on the middle peg diagonally. Do the same to the other side.

Do the same until you reach the top of the loom!

Now reach into the top rubber band and place a rubber band on the hook. Then pull the rubber band so that the rubber band is half in the rubber band it's in and half out.

Now pull the rubber bands off and place a hook on one end of the rubber bands. Then connect the clip to the other end too.

Now your done!! PLEASE like and/or follow! ;D