Rainbow Loom Ghost Charm

by RAYZORWIRE in Living > Toys & Games

3963 Views, 18 Favorites, 0 Comments

Rainbow Loom Ghost Charm

temp_-1502658728.jpg
Your materials. You will need 45 clear or while bands, 2 black bands, and 1 band of your colors choice. You'll also need a looming hook, i recommend a metal one.

Looming

temp_1112436162.jpg
Make sure your loom half circles are facing towards you.

The Left Side, Right Side, and Middle

temp_-165162710.jpg
temp_-1502658728.jpg
Double bands down 7 times on left side and right side. (pic 1)
Double bands down the middle 6 times. (pic 2)

Triangles

temp_1650133839.jpg
Place five triangles single point upwards with single band's each.

Capping

temp_348025195.jpg
Place a matching cap on each of the three bottom pegs.(I'm using clear.)

Eyes

temp_-1493516131.jpg
temp_-1437620539.jpg
temp_-1164480773.jpg
temp_1157466938.jpg
temp_118879919.jpg
Make two black caps. (pic 1)Put one on the left side of the THIRD triangle. Do the same with the right side of the same triangle. (pic 2) Now this might get tricky for some so bare with me. Put your hook on the inside of one of the black eyes and grab the single clear (or white) band and pull it up. (be cadre not to let the other two sides of the triangle come off their pegs! )(pic 3) Now pull the black cap off the peg and place the clear band back on its peg. (pic 4) Do the same with the other eye and your loom should look just like mine. (pic 5)

Time to Get It Together!

temp_299974512.jpg
temp_800243371.jpg
Start looming from the bottom left by going behind the cap you placed earlier and go all the way to the top. (pic 1) Do the same with the middle and the right side as well. (pic 2) NOTE: Even with the single band triangles, go behind them and just hook the double band to raise it and put it on its corrisponding peg.

The Top

temp_-1474324360.jpg
temp_1059232620.jpg
temp_1868715775.jpg
Once you get to the top, put your hook through the right bands and bring them over to the middle. (pic 1&2) Do the same with the left side bands so that the top row of bands are all in the center peg. (pic 3)

Locking

temp_-1689161761.jpg
temp_1657320097.jpg
temp_-559198775.jpg
Put your hook through the top peg with all the bands (pic 1)and thread a color bands of your choice (I'm using red)(pic 2) and lock it so that those band won't unravel all your work. (pic 3)

Remove Your Ghost Carefully!!

temp_1134515621.jpg
temp_-935717180.jpg
If you get to excited during this past you could snap bands and you'll have to start all over again! That's not cool. Gently stretch your Ghost.

All Done?!!

temp_963272889.jpg
Personally, I find that using clear or glow in the dark bands have the coolest effect. Use your imagination and have fun. Hope you like my tutorial and look forward to my next Instructable which will be 3D pumpkins. See you next time! Plz leave comments and follow me. PLEASE SHOW ME YOUR WORK!!!