Rainbow Loom Heart Charm

Heyo! This is my tutorial on a rainbow loom heart charm! I hope you enjoy this tutorial, I will take requests for new tutorials anytime!

Place a band from the first left peg to the second middle peg. Then place bands from the first left peg to the second left peg, and the first right peg to the second right peg. Place bands down two more times, but curve in the second time. Then place bands down the middle twice.

Place connector bands across your loom twice.

Wrap a band twice around your fingers, and look carefully at the pictures to see where to place them. There will be 2 cap bands.

Go under the first cap band and hook your first bands. Then, hook the bands up. Don't hook the curved bands down, but go under the cap band, and hook them up from there.

For the slip knot, put your hook through the bands on the first left peg. Take the bottom loop and put it on your hook. Now, take the right loop, pull it off the hook, and tighten. Repeat on the first right bands.

When you take it off the loom, there may be two loose bands that you can cut. Then, cut the loop off one of the slip knots, but not too short! The project may come apart if you cut too much.

You're done! As I said, I do take requests, and I hope you can show me yours. Bye!