Rainbow Loom:Triple Single

So this is my favorite design and I want you all to learn it too. You have seen the single design but now you have to make its triple!

DUE TO LIMITED BANDS I WILL NOT FILL THE WHOLE LOOM WHICH MAKES A RING!

Latest Tutorial: https://www.instructables.com/id/Rainbow-Loom-Railr... (Railroad Bracelet)

Like my Facebook page: https://www.facebook.com/rainbow.looms.by.sara

You'll need

• Rainbow Loom
• Hook
• S clip OR C clip

Place the loom in a fact that the arrows are facing away from you

Add two bands diagonally at the end as shown

Then add straight bands as shown till the end of the loom

DUE TO LIMITED BANDS I WOULD END AFTER 6 TO 7 COLUMNS

Afterwards, place the background band in a manner that their arrow is facing towards the end of the loom

Make a shape of an eight and transfer both ends on one finger. Stretch it and place it on last middle peg.

Your loom should look like as shown.

Push your hook through the cap band and the two bands bottom to it and pick the last band. Loop it to the next,

Do the same for the sides

Do the same for straight lines in all three rows

It should look like as shown

Push your hook through the bands

Add another band on the end if the hook

Both ends of the band should be on the hook.

Hold every band on the peg and remove them. (all three rows)

KINDLY DONT REMOVE FROM THE HOOK

Add a band from top to bottom and do the same with 5 or 6 more bands (maximum) on the same row.

Use the band on the hook as the cap band

Loop the bands as you did before. Push your hook through the last one and remove

TA-DA!