Rainbowloom Bracelet
Rainbow loom is a bracelet that is made out of little rubber bands.
First, take loom out of the box.
Second, start from the side with arrows pointing toward you.
Third, lay the first rubber band.
Fourth, lay the 2nd rubber band.
Fifth, continue laying the rubber bands until you reach the end.
Sixth, turn the loom around so now the arrows are pointing toward you.
Seventh, use the hook to pick up the 2nd rubber band.
Eighth, pull it up so it releases from the pin pull it and hook it on to the forward pin.
Ninth, pull ht third rubber band up so it releases from the pin pull it and hook it on to the forward pin.
Tenth, repeat the steps 7,8 and 9 until you reach the other side if the loom.
Eleventh, loop the last rubber band on to the adjacent pin.
Twelfth, secure the last rubber band with a c clip and remove it from the loom
Thirteenth, Secure the other end with the c clip.
Fourteenth, ENJOY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!