Raspberry Pi Pad! Capacitive Touch Screen Tablet! (樹莓派平板!電容觸控式平板電腦！)

A brief guide on making your very own touchscreen pi pad!

My youtube channel

Howard Taylor

這是一個教你特有的觸控螢幕平板的簡略指南！

我的YouTube頻道

Howard Taylor 機器割草機

Element 14 capacitive touch screen £60 Element 14 電容觸控螢幕 60鎊

Apple ipad mini battery £10 蘋果ipad迷你電池 10鎊
Lithium battery charger and 5v usb 2a driver board £5 鋰電池充電器和5伏特usb 2a驅動板 5鎊
Raspberry pi 2 £35 樹莓派 2 35鎊
Soldering iron and skills 焊鐵和技巧
Ply wood and saw skills £5 夾板和用鋸技巧 5鎊
Dremel and cutting discs 刻磨機和切割盤
Wood glue, hot glue gun 熱溶膠、熱溶槍

Watch the YouTube movie

Watch the YouTube movie!

Uses Element14 7 Inch Capacitive Touch Screen. Dremel Away the Screw Tabs and Buy a Longer DSI Cable.

Remove Tall Components From Raspberry Pi Pcb. Ethernet and Dual Stack Usb Ports.

I had a USB power and charger PCB with two single height connectors... so i robbed them from the pcb and they fitted nicely to the PI... (Shown in picture 2 - lower picture)

我有一個USB電源和PCB充電器與兩個single height連接器...所以我把他們從pcb上取出，他們很合適 PI ...（如圖2 - 較下方的圖）

Get Your Hands on an Ipad Mini Battery, Hollow Out Some Ply Wood With a Chisel.

將您的手放在Ipad迷你電池上，用鑿子挖空一部分的夾板。

Arrange Components, With Tape and Hot Glue, Glue Ipad Mini Battery in Place. Solder Wifi Direct to Pi Pcb!

使用膠帶和熱膠安裝組件，黏牢Ipad迷你電池在位子上。直接將Wifi焊接到Pi 印刷電路板！

Saw Some Ply Wood and Make a Booking! Install Software Per Instructions on Element14 Website. Fit Low Profile Usb Connectors.

鋸一些夾板和-------- 在Elements 14 網站上安裝每個說明的軟件。適合短檔版Usb連接器。

Raspberry Pi Pad! Capacitive Touch Screen Tablet! (樹莓派平板!電容觸控式平板電腦！)