Raspberry Pi Wifi Walkthrough - 3DPrinterOS

by 3DPrinterOS in Workshop > 3D Printing

3083 Views, 35 Favorites, 0 Comments

Raspberry Pi Wifi Walkthrough - 3DPrinterOS

Raspberry Pi - Wifi - 3DPrinterOS - How to - Web.jpeg

These instructions are for setting up your Raspberry Pi and Wifi to work with your 3D printer in 3DPrinterOS. Prior to following these steps, you should have already requested a Pi image, downloaded and flashed the Pi image to Pi and have everything plugged in and turned on.

Connect to the 3DPrinterOS Hotspot

1.png

Open a Browser Window and Navigate To: Http://10.10.0.1/wifi

2-Auth..png

Enter Your Credentials That Came With Your Pi Image

2.png
3.png

A dialog box will pop up saying “Authentication Required”

Here you will enter:

User Name: pi
Password: *Password from received email*

Select the Network You Want to Connect to and Click Connect

4.png
4_1.png

Enter the Selected Networks Wireless Password

5.png

Give It a Moment to Connect and Now Your Raspberry Pi Is Set Up Via Wifi to Your Network!

6.png

Disconnect From 3DPrinterOS Hotspot, Connect Back to Your Home Network

7.png

Go to the Printers Tab in Your 3DPrinterOS Account

8.png

Click the Settings Button and Choose Your Printer Type

9.png

Your Printer and Raspberry Pi With Wifi Are Now Ready to Go!

10.png