Ray and Jeffery's Robot "The Rocket"
by RayL76 in Circuits > Robots
739 Views, 5 Favorites, 0 Comments
Ray and Jeffery's Robot "The Rocket"
This is our robot "The Rocket". Jeffery and I built this robot in our Robotic Class. We were so excited when we did this. We spent three classes periods to finish it. We won the Robots' battle in our class, we lost one round to the "Dusty", however, we did not give up and fought again. Finally, we got the champion.
We prepared all the materials.
Then we started to make the shovel, we put a lot of connectors to make it stable.
.We also put a hollow square to make it large and more easy to tilt the enemies.
Then we got out the little connectors.
Then we put a beam in front of it that makes sure it didn’t flip.
We first used several strips to put the engine.
We used four engines on this robot.
After that we started to build the body part of the robot.
Then, we add an extra layer on that using the 3 rectangle shaped pieces.
Plug them on our robotic body
Solidify our robotic base.
PUT THEM TOGETHER
We put a structure of two long pieces and two small piece under the engine to stable them.
We did it on all of our engines.
We stabled it pretty well using a lot of connectors, this makes sure it doesn’t fall apart.
We put three tires together.
SIX BIG TWO SMALL
We stabled it pretty well using a lot of connectors, this makes sure it doesn’t fall apart.
Receiver
Finally, we put our battery and receiver on, and we also makes sure the battery is full.