Real Metal Looking Sword Out of Pallet Wood

by Epic Workshop in Workshop > Woodworking

19223 Views, 288 Favorites, 0 Comments

Real Metal Looking Sword Out of Pallet Wood

Real Metal Looking Sword Out Of Pallet Wood

I have always wanted a sword, since I made a viking shield it needed the Viking sword to go with...

Check out my YT channel:
SUBSCRIBE HERE

Processing the Stock

Untitled.png
2.png
3.png

I am using beech pallet wood

Cut it to size

Mark the middle

Forging

4.png
5.png
6.png
7.png
8.png

Draw out the shape of sword and shape it with chisel or wood plane

Hollow out the fuller with router or chisel it with gouge

Make Bevels using the wood plane

Cross-guard

9.png
10.png

I have made through mortise hole to attach cross-guard to tang

Make It Special

11.png
12.png
13.png

I made my own design on pommel and cross-guard and also carved +ULFBERH+T inside of fuller

Handle

14.png
15.png

I Assembled the whole sword, sand it and wrapped it with cord

Paint Job

16.png
17.png

Paint it with Silver (3 coats) then black from far away

first step will give you the look of cast iron

And then scrub it with thinner on piece of cloth do get steel look and aged finish ( but don't overdo it because you will remove all the paint)

Sword to Be Proud of :)

18.png
19.png
20.png
21.png

This build came out perfect and I am super happy :3