Repairing Camel for "Camel Up!"

by rnsmckin in Living > Toys & Games

3808 Views, 16 Favorites, 0 Comments

Repairing Camel for "Camel Up!"

Camel 6.JPG

"Camel Up!" is a fun board game that involves strategy, betting, and luck. The key element is a race track with stackable camels that compete. My friend, Josh, received a set with a one orange camel that was shorter on one leg than the others...and as such, wouldn't stack! The horror! So I borrowed two for a week and did a little prosthetic camel leg repair. You can, too!

What You'll Need

Camel 4.JPG

Two Camels (the bad one, and a good one)

Two part Epoxy

Masking Tape

Paper clip

Wire Snips

Sand Paper

Colored Paint

Lengthen the Bad Leg

Camel 1.JPG

On the shorter side of the camel, drill a hole slightly larger than a paper clip. Then cut a short portion of the paper clip, add some mixed epoxy, and insert into the drilled hole.

Mask the Good Camel

Camel 2A.JPG
Camel 2.JPG

While the epoxy sets on the Bad Camel, tape off the Good Camel with masking tape. Make sure to take your time and cover all the curves and humps well. On the opposite side of the intended repair (in this case, the left side of the Good Camel--the right side is the side we'll repair), fold the tape over. This is important, as when combined with the next step, it will form a barrier to prevent epoxy from seeping out and ruining the Good & Bad Camel.

Then flip the Good Camel over and place a piece of masking tape along the opposite side (left side). The sticky side will be up.

Create a Camel Mold

Camel 3.JPG

Add the Bad Camel (with paper clip peg-leg) directly on top of the Good Camel to make a mold. The Bad Camel will stick to the masking tape, creating a small void. Push the Bad Camel firmly onto the sticky masking tape, as well as against the Good Camel.

Add the Epoxy

Camel 5.JPG

Mix together some more epoxy, and using the rest of the paper clip from earlier, use it to add the epoxy to the camels. Push the paper clip into the glue to remove any air bubbles.

Let it dry for a day. The epoxy will set quicker than this, but you want it to be nice and firm.

After a day, remove the tape, gently sand the new camel let, then coat with the appropriate color of spray paint. The new camel leg should fit perfectly into all other camels, and you'll be back at it.

Start Stacking!

Camel 6.JPG

Now you'll have a recuperated camel that can act as top, middle, or bottom camel, whereas before, orange on bottom wouldn't work at all.

I totally failed to snap any pics of the final side...or the painting (I get excited at the end of a project and sort of lose focus in the rush to finish)...but I'll remember that for future projects. Let's just say that Josh, the friend with the game, is very particular about his gaming pieces, and he was thrilled to have a fully functioning game piece.