Repairing and Restoring an Old Bathroom

by Sarrella Blog in Workshop > Home Improvement

2763 Views, 19 Favorites, 0 Comments

Repairing and Restoring an Old Bathroom

thumb.JPG

I decided to do major repairs in my family's old house that they used to rent out, the house stayed unoccupied for a while so when I first walked in, the air felt heavy because the doors and windows stayed closed for a long time. The house was very humid, filled with dust and dirt, so I opened the doors and windows to let the fresh air in, then took a tour of the house and decided to start with the bathroom.

The next day, I woke up early, grabbed my tools and equipment and went back to the house to start working and I'm going to share with you my journey to fixing and restoring the bathroom.

Supplies

Examining the Bathroom

DSC01967.JPG
DSC01969.JPG
DSC01970.JPG
DSC01997.JPG
DSC02152.JPG
DSC02153.JPG
DSC02154.JPG
DSC02155.JPG
DSC02156.JPG
DSC02157.JPG
DSC02508.JPG

I started examining the bathroom to know the necessary repairs. I noticed that the walls were covered in mold, the ceiling had a lot of cracks and pieces of paint falling off, the cabinet was dirty and filled with junk, the radiator was rusty, the bathtub was moldy and had random holes, the window was dirty and the grout needed to be replaced.

Scraping Old Paint

DSC01967.JPG
DSC01968.JPG
DSC01970.JPG
DSC01972.JPG
DSC01973.JPG
DSC01974.JPG
DSC01975.JPG
DSC01976.JPG
DSC01977.JPG

The ceiling had shallow cracks and paint pieces were peeling and falling off. I climbed a ladder, took a scraper and started scraping around the cracks in the ceiling to remove loose paint pieces, I wore a face shield to protect my eyes from the falling debris.

Fixing the Ceiling

DSC01977.JPG
DSC01978.JPG
DSC01979.JPG
DSC01982.JPG
DSC01983.JPG
DSC01984.JPG

After scraping the ceiling, I used sandpaper to smooth rough areas, then took spackling paste, put a generous amount on the scraper and started applying it on the cracks to fill them completely.

Making It Smooth

DSC01985.JPG
DSC01986.JPG
DSC01987.JPG
DSC01988.JPG
DSC01990.JPG
DSC01992.JPG

After filling the cracks, I took a putty knife and used it to distribute the spackling paste evenly to make the surface smooth. When I was done, I left the ceiling for hours to dry.

Painting the Ceiling

DSC01993 (1).JPG
DSC01993 (2).JPG
DSC01993 (3).JPG
DSC01993 (4).JPG
DSC01993 (5).JPG
DSC01993 (6).JPG

Now it's time to paint the ceiling, I brought a paint tray, a bucket of white paint and a paint roller. I put a plastic bag in the paint tray before pouring the paint to keep it clean for next uses. I started painting the ceiling section by section using the paint roller, I applied the first coat, left it to dry, then applied a second coat to make the color more opaque.

Fixing Wires and Installing Light Cover

DSC01993.JPG
DSC01994.JPG
DSC01995.JPG

I noticed that the light bulb was flickering, the wiring job was badly done, the electrical wires were tangled and parts of them were exposed which probably caused connection problems, also there was no light cover. I turned off the electricity for the bathroom and started detangling and organizing the wires and then I covered the damaged parts with electrical tape. Later, I went and got a new light bulb and cover and I installed them.

Bathroom Cabinet

DSC01995.JPG
DSC01997.JPG
DSC01998.JPG
DSC01999.JPG

The cabinet was full of old useless stuff like empty bottles, toothpaste and brushes, nail polish bottles, an oil bottle and other things. I took all the stuff carefully and threw them in a trash bag.

Examining the Cabinet

DSC02001.JPG
DSC02002.JPG
DSC02003.JPG
DSC02004.JPG

After emptying the cabinet, I started examining it to see what steps I was going to take to fix it. The shelves were dirty and dusty, some of the paint came off and I noticed a gross black stain where the bottle of oil was.

Vaccuming the Cabinet

DSC02005.JPG

I grabbed my vacuum and started vacuuming inside and outside the cabinet to get rid of the dust, the dirt and the spider webs that were in the corners.

Preparing the Cleaning Solution

DSC02006.JPG
DSC02007.JPG
DSC02010.JPG
DSC02011.JPG
DSC02012.JPG
DSC02014.JPG

To prepare the solution that I'm going to use to clean the cabinet, I took a bowl, dish soap and a scrubber. I put a good amount of dish soap into the bowl then poured hot water over it until it became runny but not too watery, then I mixed it with my hand to make it foamy, after that, I put the scrubber in the bowl to let it soak a little bit.

Removing Shelves

DSC02015.JPG
DSC02016.JPG
DSC02017.JPG
DSC02019.JPG

I removed the shelves from the cabinet one by one and put them in the sink to clean them.

Scrubbing the Shelves

DSC02020.JPG
DSC02021.JPG
DSC02022.JPG
DSC02023.JPG
DSC02024.JPG
DSC02025.JPG

As usual I forgot to bring gloves so I took the scrubber with my bare hands, squeezed the excess of the solution and started scrubbing the shelves in a circular motion until the stains were gone. When I was done scrubbing, I dried the shelves with a sponge and put them outside in the sun to let them air dry.

Scrubbing the Cabinet

DSC02026.JPG
DSC02028.JPG
DSC02029.JPG
DSC02032.JPG
DSC02033.JPG

I went back to the cabinet, took another scrubber and started scrubbing the inside and outside of the cabinet the same way I did to the shelves.

Removing Stains

DSC02034.JPG
DSC02035.JPG
DSC02036.JPG

This oil stain took me the longest to remove, it was kinda sticky but really dry on the wood so I kept scrubbing in a circular motion again and again until it was completely gone.

Drying the Cabinet

DSC02038.JPG
DSC02039.JPG
DSC02041.JPG

After I finished scrubbing all the cabinet, I wiped it with a dry sponge to remove the excess water and left the window open so it can dry faster.

Painting the Shelves

DSC02042.JPG
DSC02044.JPG
DSC02046.JPG
DSC02047.JPG
DSC02048.JPG
DSC02049.JPG
DSC02050.JPG
DSC02051.JPG
DSC02052.JPG
DSC02053.JPG
DSC02055.JPG

I came back the next day, with gloves of course, and I brought with me white paint and a paint brush. I started painting the shelves one by one, then left them to dry.

Painting the Cabinet

DSC02057.JPG
DSC02058.JPG
DSC02059.JPG
DSC02079.JPG
DSC02080.JPG
DSC02081.JPG
DSC02082.JPG

I went inside to the bathroom and started painting the outside of the cabinet with covering the handles of the doors with aluminum foil to protect them from getting stained.

Painting the Inside of the Cabinet

DSC02083.JPG
DSC02084.JPG
DSC02085.JPG

I painted the inside parts of the cabinet.

Painting the Top and Bottom

DSC02086.JPG
DSC02087.JPG
DSC02088.JPG
DSC02089.JPG
DSC02090.JPG
DSC02091.JPG

After I finished painting the inside and outside of the cabinet, I painted the top and bottom.

Fixing Holes

DSC02149.JPG
DSC02150.JPG
DSC02151.JPG
DSC02153.JPG

I left everything to dry, then took the shelves and put them back in the cabinet. I noticed some small holes in one of the shelves so to seal them, I took some spackling paste, applied it on the holes and left it to dry.

Removing Rust From Radiator

DSC02152 (2).JPG
DSC02152 (3).JPG
DSC02152 (4).JPG
DSC02152 (5).JPG
DSC02152 (6).JPG
DSC02152 (7).JPG

The radiator was so rusty and needed to be cleaned, I removed the dust with a brush, then took rust removing treatment and applied it on the radiator using an old paint brush. Before doing the treatment, I wore my face mask, face shield and left the window open because most rust treatments have a strong toxic odor that shouldn't be inhaled. I applied it, left the bathroom and let it sit for 30 minutes to dissolve the rust.

Painting the Radiator

DSC02152 (8).JPG
DSC02152 (9).JPG
DSC02152 (10).JPG

After the time has passed, I grabbed a wet sponge and wiped the radiator to remove the treatment and as you can see it did a great job in removing the rust. I dried the radiator, then grabbed a paint brush, white paint and started painting the radiator. After I was done, I left it to dry.

Treating the Door for Woodworms

DSC02151.JPG
DSC02152.JPG

There were small holes in the bathroom door which indicates the presence of woodworms. Luckily, the infestation was only in a small area and looked recent. The wood of the door was in good condition so there was no need in changing it. I took a wood bug treatment and applied it on the door using a syringe. I treated the whole door to prevent the infestation from spreading.


Fixing Holes and Painting

DSC02153.JPG
DSC02154.JPG
DSC02156.JPG
DSC02157.JPG
DSC02158.JPG

After the treatment completely dried, I applied spackling paste to fill the holes and small cracks on the door, then I painted the door. Later, I changed the lock.

Cleaning and Painting the Window

DSC02152.JPG
DSC02153.JPG
DSC02154.JPG
DSC02155.JPG
DSC02157.JPG

The window was dirty and the paint was peeling off in some areas, so I cleaned it with a sponge soaked in the dish soap solution, dried it, then applied Vaseline on the glass so it won't get stained with paint. I usually use tape on the glass but I didn't have any that day. I painted it with the paint brush and left it to dry.

Scraping Thick Grout

DSC02152 (46).JPG
DSC02152 (47).JPG
DSC02152 (48).JPG
DSC02152 (49).JPG
DSC02152 (50).JPG
DSC02152 (51).JPG
DSC02152 (52).JPG
DSC02152 (54).JPG
DSC02152 (56).JPG

Some tiles had excess thick grout that made the lines uneven, so I took the putty knife and started scraping thick grout pieces and dirt between the tiles, then I collected them in a dust pan and brushed the tiles with a brush to remove debris.

Removing Yellow Stains

DSC02152 (59).JPG
DSC02152 (60).JPG
DSC02152 (61).JPG
DSC02152 (62).JPG

There were yellow stains on the wall near the bathtub, I soaked the toothbrush in bleach and brushed the stains vigorously and left the bleach there for a few minutes to dissolve them.

Cleaning the Bathtub

DSC02181.JPG
DSC02182.JPG
DSC02183.JPG
DSC02184.JPG

The bathtub was dirty, so I ran hot water on it, then started cleaning it with a scrubber soaked in dish soap, baking soda solution first, then used the toothbrush to clean the corners and grout lines. When I was done I rinsed it with water.

Sealing Holes

DSC02152 (71).JPG
DSC02152 (72).JPG
DSC02152 (78).JPG
DSC02152 (79).JPG
DSC02152 (80).JPG
DSC02152 (81).JPG
DSC02152 (82).JPG
DSC02508.JPG
DSC02509.JPG
DSC02510.JPG

The bathtub had a bunch of random holes that were dirty or badly sealed, so I cleaned them very well with the cleaning solution and sealed them with the spackling paste and then I fixed the grout between the tiles and the bathtub the same way.

Removing the Mirror

DSC02152 (85).JPG
DSC02152 (89).JPG

The mirror was damaged, held with tape and basically falling apart, so I had to remove it from the wall and carry it out of the bathroom carefully because it was heavy and I went and bought a new mirror.

Cleaning Wall Tiles

DSC02190.JPG
DSC02191.JPG
DSC02192.JPG
DSC02193.JPG
DSC02194.JPG
DSC02195.JPG
DSC02196.JPG

I took a sponge, soaked it in dish soap solution and started cleaning wall tiles and the sink in a circular motion until all the mold and dirt were gone.

Cleaning the Grout

DSC02152 (89).JPG
DSC02152 (90).JPG
DSC02152 (91).JPG

I took the toothbrush, dipped it the cleaning solution and started brushing the dirty grout, then wiped it with a wet sponge.

Regrouting Wall Tiles

DSC02152 (100).JPG
DSC02152 (101).JPG
DSC02152 (102).JPG

The grout was mostly damaged, so I decided to regrout the whole bathroom, I took the putty knife and used it to apply grout between tiles then I wiped the excess with a slightly wet sponge.

Cleaning and Regrouting Floor Tiles

DSC02152 (114).JPG
DSC02152 (115).JPG
DSC02152 (116).JPG
DSC02152 (117).JPG
DSC02152 (118).JPG
DSC02152 (120).JPG

I moved to floor tiles, I scraped the dirt between tiles, swept the floor with a broom, then wet moped the tiles. I noticed that most of the grout was gone probably from using abrasive cleaning products, so I applied new grout and left it to dry.

Done

DSC02511.JPG

After regrouting the tiles, I was done with all the repairs. It was getting dark so i collected my equipment and left to let everything dries and sets in place overnight and come back the next day to install the new mirror and show you the final results.

Results

DSC02513.JPG
DSC02514.JPG
DSC02515.JPG
DSC02516.JPG
DSC02517.JPG
DSC02518.JPG
DSC02519.JPG
DSC02520.JPG
DSC02523.JPG

After days of work, the bathroom became very clean, bright and usable, I'm really happy and satisfied with the results.

I hope that you enjoyed this project and found it interesting.

My other blog: https://medium.com/@ypipijou

(Sarrella Blog is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com)

Before and After

DSC01967.JPG
DSC01969.JPG
DSC02152 (2).JPG
DSC02152 (31).JPG
DSC02152 (108).JPG
DSC02152 (115).JPG
DSC02153.JPG
DSC02154.JPG
DSC02195.JPG
DSC02196.JPG